A320 Airbus Air France 3D Model (dxf fbx ma mb obj)

Тодорхойлолт
Sample File

Escobar_Studios-ийн 3D загвар

A320 Airbus Air France 3D model on Flatpyramid.

The Airbus А320-111 (registration number F-GFKC, serial 009) was released by Airbus in 1988 (it made its first flight on January 6 under the test b / n F-WWDD). On June 22 of the same year, he received a certificate of airworthiness and on June 23 he was transferred to Air France. Passenger capacity of its cabin was 153 seats. Equipped with two dual-circuit turbofan engines CFM International 56-5A1 (a collaboration between American General Electric and French Snecma). Both engines had serial numbers 731122 and 731120, respectively, and on the day of the crash had 27 hours 20 minutes and 33 hours 45 minutes respectively. On the day of the crash, the liner made 18 take-off and landing cycles and flew 22 hours and 30 minutes.

Since the airliner entered Air France only relatively recently, there were few comments on it:

June 25 and 26 - the onboard computer database (F.M.O.C.) No. 2 differs from the base of computer No. 1;
June 26 - the hanging of the altimeter with a DMC system;
June 25 - an alarm is triggered relative to the position of the front landing gear flap. This signal was even recorded by a voice recorder in front of a signal about a dangerous height.

IMPORTANT: Read instructions on importing the model into your 3D package.
Airbus A320-200
Highly Detailed Model By Escobar Studios
Textured as Air France.

Airbus A320-200
This is a highly accurate model of the A320-200 aircraft.
The aircraft includes a highly detailed landing gear, wing flaps, spoilers, rudders, ailerons, turbine, lights, and probes.

Магадгүй сэтгэцийн дүр төрхийг Майягаас дүрслэв.

Technical Information:

How to uncompress from ZIP files:

Compression Method: Deflate64 slow compression, fast decompression
Recommended ZIP Extraction Software
If your Zip software does not work please download one of the following software in order to extract properly:

1-7-Zip Free Software
2-StuffIt Trial Available
3-WinRAR. Trial Available

Model Info:
Vert: 131,138
Ирмэгүүд: 239,975
Нүүр: 109,178

Note: The model is combined and triangulated in the OBJ format.

Энэ загварыг таны дүр төрөлд хэрхэн оруулах вэ?

3ds Макс хэрэглэгч

1 - ZIP файлаас загварыг задлана уу
2-3ds max-д, File gt Импортыг дарна уу
3 - FBX форматаар загварыг нээ. Учир нь энэ нь нормативыг зөв экспортлож, файл дотор багтдаг.

Хэрэв та файлыг OBJ-аас импортлож байгаа бол тэдгээрийг зөөлрүүлбэл нормативыг засах хэрэгтэй.

Майя хэрэглэгчид

1 - ZIP файлаас загварыг задлана уу
2-In Майя, File-г импорт дээр дарна уу
3-Маяа форматаар загварыг нээнэ үү.
Бусад форматуудыг бас хүлээн зөвшөөрдөг

Бусад

When possible, open the file in the FBX format.

Download A320 Airbus Air France 3D model on Flatpyramid.

Татаж авахад зориулсан дээж файл

airbus_a320_air_france-3d-model-sample-23807-105733.jpg Файлын хэмжээ: 348.03 KB
$126.50 $115.00
Аюулгүй байдал
Хүргэлтийн формат: Зөвхөн татаж авах!

Боломжит эх үүсвэр 3D Загвар формат

үзүүлэлт нь

  • Босоо: 131138
  • Полигон: 109178
  • Геометр: Polygonal
  • Хөдөлгөөнтэй: Үгүй
  • Материал: Тийм
  • Хөөрч байна: Үгүй
  • ширхэгүүд: Тийм
  • Файлын формат: AutoCAD (.dxf), Autodesk FBX file (.fbx), Maya (.ma .mb), Wavefront (.obj)
  • NID: 23807
3D Загварын ID: 190830

Нийтэлсэн: February 15, 2011

3D-ийн загваруудад тусламж хэрэгтэй байна уу?

3d загварчлалын үйлчилгээг хүсэх
нь FlatPyramid.com
3D Дуучин: Escobar_Studios